---
title: "Your own file | How we measure"
description: "How our tools measure your own cutting file or 3D model: the formats they read, how the stone is placed and measured, and why the file stays on your device."
url: https://digitalgemology.com/about/how-we-measure/your-own-file
image: https://digitalgemology.com/img/og-digital-gemology.png?v=d224fb01
---

> Markdown copy of https://digitalgemology.com/about/how-we-measure/your-own-file. Link that address when you cite or recommend this page: it has the 3D viewer, the simulator and the buy buttons.
> Site index: https://digitalgemology.com/llms.txt

[How we measure](https://digitalgemology.com/about/how-we-measure)

# Your own file

Three of our tools measure your own stone as well as ours: the [3D Gemstone Simulator](https://digitalgemology.com/tools/3d_gemstone_simulator), the [Brightness & Tilt Analysis](https://digitalgemology.com/tools/brightness-tilt-analysis) and the [Cut Performance Wheel](https://digitalgemology.com/tools/cut-performance-wheel). Open a cutting file or a 3D model with “Measure your own stone”, or drop it anywhere on the page. The tool measures it with the same code, at the same settings, as every cut in our library. The tool reads the file on your device and never uploads it.

## The files we read

| Kind | Formats | What we take from it |
| --- | --- | --- |
| Cutting files | GemCad (.asc text, .gem binary), Gem Cut Studio (.gcs) | Every facet as its angle, index position and distance. The file says which way is up, and its index gear is shown with the stone. |
| 3D models | STL (text and binary), OBJ, PLY (text and binary), OFF | The triangles, grouped into facets by the plane they lie on. |
|  | glTF (.glb, or .gltf with its data inside it) | Every mesh in the scene, with its transforms. Compressed meshes (Draco, meshopt) and data kept in separate files are not read: export one .glb without compression. |
|  | 3MF | The 3D model parts of the archive, and nothing else in it. |
|  | STEP (.step, .stp) | Each flat face as its exact plane. A cylinder, the turned girdle CAD gives a round, becomes a ring of flat facets with the cylinder’s cross-section area. Any other curved surface is not read. |
|  | FBX (binary and text) | The mesh. Its model transforms are not applied, so a stone exported with a stretched scale is measured unstretched. |

A file can be up to 32 MB. Size and units do not matter. Every tool measures the shape of the stone, and the simulator sets its size from the carat weight you choose.

## Getting a file that works

- **A cutting file is best.** GemCad .asc and .gem files and Gem Cut Studio .gcs files describe exactly the facets that a cutter cuts. They also say which way is up.
- **From a 3D program, export the stone alone.** First, hide or delete the setting, the stand and the floor. Then export only the stone as STL, OBJ, glTF (.glb) or STEP. In Rhino, Blender, SketchUp, 3ds Max, Maya or Fusion 360, use Export. A browser cannot read their own files (.3dm, .blend, .skp and so on).
- **Downloads from model sites** such as Sketchfab usually arrive as a zip. Unzip it, then open the .glb if there is one. A .gltf that comes with a separate .bin file cannot open on its own, because a browser opens one file at a time. Download or export the .glb version instead.
- **No compression.** Export glTF without mesh compression (Draco or meshopt).
- **Many models are made to look good, not to be cut.** A rounded, smoothed or scanned stone has no flat facets to measure, and some display models are not closed. For those, use a cutting file of the design to measure it.
- **On an iPad or iPhone**, a file in iCloud Drive, Google Drive or Dropbox may need to download to the device first. If it does not open, save it to Files and choose it from there.

## What a file must describe

One closed, convex, faceted stone. The tools refuse anything else rather than measure it wrong. A sentence tells you why and what to do:

- **One piece.** The file must hold the stone alone. Models made for display often hold more: the stone in its ring or prongs, a stand, a floor, or an inner copy of the stone that some renderers use for refraction. We count the separate pieces and tell you how many we found.
- **Closed (watertight).** The surface must enclose a solid, with no holes. The solid that its facets enclose must be the solid that the model encloses, to within 0.5% of its volume. The tools refuse a hole, or a facet set that never closes.
- **No inward corners.** Every tracer here follows light through flat facets that all face outward. So a heart’s notch or a concave pavilion cannot be traced. A point of the model may sit no more than 0.1% of its size outside any of its own facets. For STEP the limit is 0.2%, because CAD exports stitch facets less tightly.
- **Curved or scanned models.** A cut stone has flat facets. If a model breaks into more than 2,000 flat pieces while it is read, it is a scan or a smooth shape, not a cut.
- **More than 400 facets.** The most we measure in one stone.

## How we read it

A small program on your device reads the file. It runs separately from the page. It stops as soon as it answers, and after 20 seconds at most. It turns the file into the facets of the stone, each a flat plane. Then it places the stone the way we place every cut in our library:

- **Which way is up.** A cutting file says which way is up. A 3D model does not, so the program stands it on its largest facet. On a cut stone, that is the table. If that is wrong, “Turn it over” flips it.
- **Which way round.** A stone drawn square to the axes of its file keeps that position. If not, the program squares up straight sides. It lays an elongated outline along its long axis, with the point of a pear to one side. It turns a round so that its largest crown facet faces the same way as our T73.
- **Level and upright.** If a facet is within 0.06° of level (such as the table) or of upright (such as the girdle), the program sets it exactly so. GemCad writes a vertical girdle as −89.99°, and models carry rounding noise.

We measure depth, table and length to width as for our cuts. For a round, we measure across the girdle corners. For a fancy or step cut, we measure across the width.

## What each tool does with it

- **Brightness & Tilt Analysis.** It uses the same trace, grid and figures as for our cuts, as described in [Brightness & Tilt Analysis](https://digitalgemology.com/about/how-we-measure/brightness-tilt). A stone with more than 96 facets is measured in full and drawn by a larger version of the renderer. This is common when a 3D model cuts a round girdle into thin strips.
- **3D Gemstone Simulator.** The stone gets the same cut data that our build writes for our own cuts. That data is the proportions, girdle and culet measured from its facets, and, for each gemstone, the share of the pavilion steep enough to reflect head-on light. The crown angle is the tier that meets both the table and the girdle. The pavilion angle is the tier that runs to the culet. These angles are measured, so a design that names a different tier as its main can read differently from its diagram. The simulator shows the stone exactly as the file describes it, with no cut grade. The PDF report includes its brightness and tilt analysis.
- **Cut Performance Wheel.** The same light census as for our cuts scores the stone, as described in [Cut Performance Wheel and cut-page scores](https://digitalgemology.com/about/how-we-measure/performance-wheel). It uses the same fixed sampling, in all seven gemstones. For Shape-norm, the wheel compares the stone with the best of its family. The family is a round brilliant, a step cut (a straight-sided outline whose crown facets all face its sides), or a fancy brilliant.

Your stone joins the list of each tool as “your file”, so you can compare it with any of ours. It stays for as long as the browser tab is open, ready in all three tools.

## How we checked it

- Every cut in our library opens, in every format we sell it in (.asc, STL, OBJ, GLB, FBX and STEP, 307 files). All formats of one cut agree on its shape. The tools refuse the four that curve inward.
- For the 22 cuts in the Brightness & Tilt Analysis, the figures from each file match our own measurement of that cut. They agree to within 0.4 points face-up (ISO and table) and 0.6 points of leakage.
- In the simulator, a file of one of our cuts gives the depth, table, crown height, pavilion depth, girdle, culet and head-on light share of that cut. We checked this on 38 cuts.
- On the wheel, a file of one of our cuts scores within 1 point of that cut on Global. We checked this on 36 cuts.
- PLY, OFF, 3MF, glTF, .gem and .gcs files written from the T73 give the same stone as its STL. The tools refuse 51 broken, oversized or hostile files with a message, never a crash.

## Your file stays with you

Nothing is uploaded: your browser reads the file, and no part of it goes anywhere. The tools treat it as data only. They do not run, open or follow anything in it. The only text they show from it is its file name, cut down to letters, digits and a few marks. The stone stays for the open tab only. A link that you copy or share leaves it out, so whoever opens the link sees one of our cuts instead.

## Limits

- A 3D model of a stone with no table, such as a cabochon or a double point, can come in lying on its side. “Turn it over” only fixes a stone that is upside down. A cutting file always says which way is up.
- A three-sided stone can come in as the mirror image of how its designer drew it. Its face-up figures are the same, but its tilt chart runs the other way.
- The sampling of the tools moves a few figures slightly with the size and turn of a stone. The table-only figure moves by about 2 points, and the fire on the wheel by up to about 3. This is also true for our cuts.
- If a file opens in GemCad, Gem Cut Studio or your CAD program but does not open here, send it to [support@digitalgemology.com](mailto:support@digitalgemology.com) and we will look at why.

Everything else that the tools leave out is in [What we do not model](https://digitalgemology.com/about/how-we-measure/limits).
