The 3D Gemstone Simulator, the Brightness & Tilt Analysis, the Hearts & Arrows Scope, the Cut Performance Wheel, the Polariscope, the Dichroscope, the Spectroscope and the Cut Grading Tool can each save what they show as a picture or a video. Each one is sized for a post, a reel or a lesson. The Studio does not record the screen. It traces or draws every frame again at the size you choose, so a video is as sharp as a still.
-
3D Gemstone Simulator
The stone as you set it: a still, or a full turn, a rock from side to side or a tilt toward you
and back, under any of the ten lights.
Open the simulator’s Studio
-
Brightness & Tilt Analysis
The four windows and the chart: a still, or a tilt sweep with the chart’s cursor following,
for one cut or two side by side.
Open the analysis’s Studio
-
Hearts & Arrows Scope
The arrows and the hearts as you set the stone: a still, the stone turning over from one to the other, or a slow turn under the scope.
Open its Studio
-
Cut Performance Wheel
The stone beside its wheel: a still, the stone’s outline growing out of the comparison’s, or a turn.
Open its Studio
-
Polariscope
The eyepiece, with the set-up if you like: a still, a full turn between the polarizers, or a tilt from the optic axis to across it.
Open its Studio
-
Dichroscope
The two windows, with the stone if you like: a still, a full turn of the dichroscope, or a tilt.
Open its Studio
-
Spectroscope
The spectrum, with the stone if you like: a still, the path through the stone growing, or the cursor reading along the spectrum.
Open its Studio
-
Cut Grading Tool
The four views or the chart, with the grade: a still, or the crown, the pavilion or the table swept through the tool’s steps.
Open its Studio
What you can make
First, set the stone, or the cuts, the way you want them. Then open the Studio from its button on the tool. The Studio starts from the view as it is, and its preview shows the frame exactly as it will be.
- A still, saved as a PNG.
- A moving picture, saved as an MP4. The simulator turns the stone a full turn, rocks it from side to side, or tips it toward you and back. The analysis sweeps the tilt from face up to 30° each way, and the cursor follows on the chart. The scope turns the stone over from the arrows to the hearts and back, or turns it under the scope. The wheel grows the stone’s outline out of the comparison’s outline while the comparison changes into the stone. Or it turns the stone beside its wheel. The polariscope turns the stone between the polarizers, or tilts it from its optic axis to across it. The dichroscope makes a full turn, or the stone tilts. The two windows change color during the move. The spectroscope lengthens the path through the stone from 1 to 10 mm, or runs its cursor along the spectrum. The grading tool sweeps the crown, the pavilion or the table through its steps while the grade follows. Every move ends where it began, so it loops.
Formats and sizes
| Format | Made for | HD | 4K |
|---|---|---|---|
| 1:1 | Posts on Instagram, Facebook and LinkedIn | 1080 × 1080 | 2160 × 2160 |
| 4:5 | The Instagram feed | 1080 × 1350 | 2160 × 2700 |
| 9:16 | Reels, TikTok, Shorts and Stories | 1080 × 1920 | 2160 × 3840 |
| 16:9 | YouTube, slides and course videos | 1920 × 1080 | 3840 × 2160 |
In 9:16, the name and the address stay clear of the buttons that the apps show at the top and bottom of the screen. Videos run at 30 frames a second, for 5, 10 or 15 seconds.
Quality, and how long it takes
Fast, Fine and Finest set how many times the Studio traces and averages each pixel. In the simulator, that is 2, 8 or 32 times for a video frame and 16, 64 or 256 times for a still. In the analysis, the Studio draws the windows once, or two or three times over each way, and then scales them down. More traces give cleaner edges and steadier sparkle.
In the Hearts & Arrows Scope, they trace 4, 9 or 16 rays per pixel for a video frame. For a still, they trace 16, 36 or 64. The Cut Performance Wheel traces its stone as the simulator does. For its morph, it traces the two stones once, as stills. The Polariscope, the Dichroscope, the Spectroscope and the Cut Grading Tool are drawn, not traced. Every frame comes from the tool’s own drawing at its full size. So there is no quality to choose, and a video is quick to make.
Your device’s graphics chip does the work, so the time depends on that chip. Before you start, the Studio measures your device and tells you how long a picture or video will take. Then it counts the frames down. A 4K video has four times the pixels of HD and takes about four times as long. Keep the tab open and in front while the Studio works.
The files
Pictures are PNG. Videos are MP4 with H.264, which every phone, editor and platform plays. The bit rate is high, because a sparkling stone is about the hardest picture there is to compress. To make a video, you need a browser that can encode video, such as a current Chrome, Edge or Safari. If your browser cannot, the Studio tells you and still makes pictures.
Made on your device
Nothing is uploaded. Your browser makes the pictures and videos and saves them directly to your device. We never see them.
Using what you make
Post and share them freely. They show a model, not a real stone. The simulator’s pictures always carry the label “A simulation, not a grading report”. Our terms ask you to keep it, so the label stays even when the name and address are switched off. Do not present a picture as a grading report, a certificate or a valuation, or as a photograph of a real stone.