The polariscope
The gemstone sets what you see. The shape sets the path through the stone and the drawing.
Drag the ring, or press [ and ]. A doubly refractive stone goes dark every 90°.
Turned 45°: light.
Ruby is doubly refractive: it splits the light into two rays vibrating at right angles, the lines on the stone. Lined up with the polarizers, at 0° and 90°, it passes nothing; at 45° it is lightest. The two rays differ by many wavelengths over the path, so the light is white (high-order white), tinted by the stone's own color.
0° looks straight down the optic axis; 90° looks across it. Or drag the stone round.
The lower polarizer lets through only light that vibrates in one direction. A singly refractive stone does not change this light, so the crossed upper polarizer stops it. A doubly refractive stone splits the light into two rays that vibrate at right angles. The upper polarizer passes part of each ray, except when the stone's vibration directions line up with the polarizers.
Uniaxial negative: refractive indices 1.770 (o-ray) and 1.762 (e-ray), birefringence 0.008. Path 5.8 mm.
The birefringence is the same as in the Refractometer. The tilt is the same as in the Dichroscope: from straight down the optic axis to across it.
What a polariscope shows for each gemstone
| Gemstone | Optics | Birefringence | Crossed polarizers, in the trade | Conoscope figure | This model |
|---|---|---|---|---|---|
| Diamond (shown above) | Isotropic | None | Stays dark (strain can show as patchy light) | None | Stays dark at every turn and tilt |
| Moissanite (shown above) | Uniaxial positive | 0.043 | Blinks; nearly dark face-up when the table is cut across the optic axis | Uniaxial, tight rings | Blinks across the optic axis; stays dark down it; the red plate reads it positive (+) |
| Cubic Zirconia (shown above) | Isotropic | None | Stays dark | None | Stays dark at every turn and tilt |
| Ruby (shown above) | Uniaxial negative | 0.008 | Blinks | Uniaxial | Blinks across the optic axis; stays dark down it; the red plate reads it negative (−) |
| Sapphire (shown above) | Uniaxial negative | 0.008 | Blinks | Uniaxial | Blinks across the optic axis; stays dark down it; the red plate reads it negative (−) |
| Emerald (shown above) | Uniaxial negative | 0.006 | Blinks | Uniaxial | Blinks across the optic axis; stays dark down it; the red plate reads it negative (−) |
| Amethyst (shown above) | Uniaxial positive | 0.009 | Blinks | Bull's-eye: no cross at the center | Blinks across the optic axis; stays light down it, in color; the red plate reads it positive (+) |
Optics and birefringence come from the simulator. They are the same numbers that the Refractometer shows. This model: a turn across the optic axis, then straight down it, between crossed polarizers, through the hexahedron.
A model of a gem polariscope: one straight path through each gemstone in daylight, between ideal polarizers. We compute it by Jones calculus from the refractive indices and measured absorption spectra of the stone. It is not a test of a real stone. Most screens give off polarized light, so never test a real polariscope against a screen. How the polariscope is modeled.