Tools

Spectroscope

Shine white light through a gemstone and read the dark lines where it is absorbed.

The spectroscope

The gemstone sets the spectrum. The shape changes only the drawing.

Through the spectroscope, by grating in lamp light: the spectrum from violet at 400 nm to red at 700 nm. Chromium lines. Band at 400 to 442 nm, strong. Line at 468 nm, distinct. Line at 476 nm, distinct. Band at 490 to 607 nm, strong. Line at 659 nm, weak. Line at 668 nm, weak. Line at 693 nm, distinct.

Light
Spread by
Chromium glows red under strong light. Illustrative, not measured.

Drag across the spectrum, or press [ and ] to step from line to line.

Through the spectroscopeChromium linesFive lines and two bands

693 nm Line: the R lines, a close pair in the deep red (Cr³⁺), distinct.

Lines identify the coloring element, not always the stone. These are chromium's lines: emerald shows chromium lines too, in other places, and a laboratory-grown ruby shows exactly these.

optic axis5 mm pathlampspectroscopegratingslitto your eye
5 mm

A longer path darkens every line and band; a shorter one shows lines a dark stone hides.

The stone from the side5 mm path

White light passes through the stone and into the slit. The prism or grating spreads it into its colors, violet to red. Where the stone absorbs light, that part of the spectrum goes dark.

How a spectroscope worksWhite light passes through a ruby, 5 mm, and into the slit. A prism spreads it into its colors, violet to red, over 10.8 degrees. The colors the ruby absorbs go dark: the violet and a broad band in the green and yellow.White lightRubySlitPrismThrough the spectroscope400500600700
Ruby through a 5 mm path: the dark bars are the light that the ruby absorbs.

Both rays measured: GIA's published Cr3+ cross-sections (Dubinsky, Stone-Sundberg & Emmett 2020), at the chromium content of a natural ruby from Thailand (G.R. Rossman, Caltech).

The same measured spectra give the two colors in the Dichroscope.

What a spectroscope shows for each gemstone

GemstoneWhat the trade seesThis model, 5 mm in lamp light
DiamondColorless: none. Yellow (Cape): a line at 415.5 nm, with weaker lines at 478, 465, 452, 435 and 423 nmNo lines or bands
MoissaniteNone in the visible; some stones absorb toward the violetNo lines or bands
Cubic ZirconiaNoneNo lines or bands
Ruby (shown above)Chromium: a close pair at 692.8 and 694.2 nm (often bright), weaker lines at 668 and 659 nm, a broad band from 500 to 610 nm, lines at 476.5, 475.0 and 468.5 nm, the violet absorbedLines at 468, 476, 659, 668 and 693 nm; bands 400 to 442 nm and 490 to 607 nm
SapphireIron: lines at 450 nm (the strongest), 460 and 471 nm, strongest in iron-rich stonesA line at 452 nm; a band 602 to 700 nm
EmeraldChromium: a pair at 683.0 and 680.5 nm, lines at 662 and 646 nm, a partial band from 580 to 630 nm, a weak line at 477.4 nm, the violet absorbedLines at 637 and 681 nm; bands 400 to 455 nm and 571 to 642 nm
AmethystNothing telling: at most a weak broad band in the yellow-greenA band 497 to 586 nm

The model lists what you can see through a 5 mm path in lamp light, spread by the grating. It leaves out a line or band that is too faint to see. Diamond is colorless here (the simulator’s D). We do not model the lines of a yellow diamond, because we have no measured spectrum for it.

A model of a hand spectroscope: a straight path through each gemstone, across its optic axis, in lamp light or daylight. We compute the spectrum from measured absorption spectra. It is not a test of a real stone. How the spectroscope is modeled.